Voron2.4 Trident carbon fiber X-axis connector All holes have a diameter of 3mm (M3 screws are lighter and have sufficient strength than M5 screws) A total of 4 carbon fiber boards have a thickness of 2mm and a weight of 25g
When installing the bearing, it may be a bit tight. Install an M3X10 screw on the other end of the aluminum column, and then install the bearing on the other end of the aluminum column. After one is installed in place, install the other. When the aluminum column is relatively soft, be sure to gently knock it (to prevent damage, send an additional aluminum column)
Including black screws and 9 aluminum columns, excluding pulleys and bearings
There will be some small pits on the surface that will not affect the use, but will affect the appearance a little. If you mind, please do not purchase